View DF1E-07EP-25C_8937973.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) b146 2.5mm pitch connectors for full lock and discrete wire connection df1e series 8. various applications with the same series, various applications can be used for the board solder dip type and in- line. 9. listed by ul, c-ul 10. glow wire compliance (compliant with iec 60695-2-11) features 1. full lock function added the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. (fig.1) 2. increase in crimping contact fixation force and semi-insertion prevention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. (fig.2) 3. mold lance adopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion prevention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. (fig.1) 5. means to prevent solder crack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to potting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production facility cost reduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with 22 awg or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added fig.2 fig.1 double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged ul, c-ul listed b147 df1e series 2.5mm pitch connectors for full lock and discrete wire connection rating products specifications current rating note 1. awg # 20 to 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a voltage rating 250vac operating temperature range : - 35 to + 85 ? note 2. operating moisture range : - 40 to 80% storage temperature range : - 10 to + 60 ? note 3. storage moisture range : - 40 to 70% note 3. item specification condition 1. contact resistance 30m
max. measured at 20mv max. and 1ma 2. insulation resistance 1000m
min. 500v dc 3. withstanding voltage no flashover or insulation breakdown. 650v ac/1 minute 4. single insertor/extraction forth min 0.29n, max 4.41n measured at the square steel pin with 0.635 0.002 5. durability (mating/un-mating) 30m
max 30 cycles 6. vibration no electrical discontinuity of 1s or more frequency : 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 7. shock no electrical discontinuity of 1s or more acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 8. humidity (steady state) 30m
max 96 hours at temperature of 402? and humidity of 90% to 95% 9. temperature cycle 30m
max. (-55 ? : 30 minutes-> 5 to 35 ? : 5 minutes-> 85 ? : 30 minutes-> 5 to 35 ? : 5 minutes) 5 cicles 10. resistance to soldering heat no deformation of components affecting performance. flow : 260 ? for 10 seconds manual soldering : 300 ? for 3 seconds note 1 : current rating of header is 3a. note 2 : includes temperature rise caused by current flow. note 3 : the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. materials / finish product part material finish remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass tin plated or gold plated in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plated or gold plated rating ul/c-ul file no. and recognition no. ul : e52653 c-ul : e52653 current rating voltage rating 20 to 22 awg : 3a 24 to 28 awg : 1a 30 awg : 0.5a 30v ac ul, c-ul rating b148 df1e series 2.5mm pitch connectors for full lock and discrete wire connection product number structure df1e c - * p - 2.5 dsa qe wrty t pin header q series name : df1e w hold types (note. 1) e number of contacts : 2 to 15 contacts (note. 2) r connector type p : pin header t contact pitch : 2.5mm y form type dsa : straight through hole ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f)(a), df1b-2428sc(f)(a), and df1b-30sc(f)(a) contacts. note 1 : when no retainer is used, all df1b- ** sc(f)(a) and df1e-2022sc(f)(a) contacts can be used. df1e - * s - 2.5 c qe wt r socket q series name : df1e w number of contacts : 2 to 15 contacts e connector type s: socket r contact pitch : 2.5mm t form type c : crimping socket df1e - * rs / p - 2.5 q wr e retainer q series name : df1e w number of contacts : 2 to 10 contacts e connector type rs/p : retainer commonly used for socket and in-line plug r contacts pitch:2.5mm df1e a - * ep - 2.5 c qe wy r in-line plug q series name : df1e w in-line plug type blank: with panel mount lock a : without panel mount lock e number of contacts : 2 to 10 contacts r ep : in-line plug t contact pitch : 2.5mm y form type c : crimping socket df1e - ** scf qw e crimping contact q series name : socket side : df1b (note 1) df1e (note 1) plug side : df1e w applicable cable size 2022 : 20 to 22 awg 2428 : 24 to 28 awg 30 : 30 awg e packaging type scf : female contact/reel/tin plated scfa : female contact/reel/gold plated sc : female contact/pack/tin plated sca : female contact/pack/gold plated pcf : male contact/reel/tin plated pcfa : male contact/reel/gold plated pc : male contact/pack/tin plated pca : male contact/pack/gold plated b149 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b application pattern b mated dimensions pin header straight type right angle type in-line plug in-line plug (panel mount lock type) photo: contact inserted in-line plug photo: contact inserted retainer straight potting type socket photo : contact inserted standard header header for potting panel mounting lock in-line plug in-line plug 3.7 df1e _ * s _ 2.5 c df1e# _ * p _ 2.5 dsa df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * p _ 2.5 ds (**) df1e _ * rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ * s _ 2.5 c df1e _ * rs / p _ 2.5 df1e# _ * p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1e _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ * rs / p _ 2.5 df1e _ * s _ 2.5 c df1ea _ * ep _ 2.5 c df1e _ * rs / p _ 2.5 25.3 9 22.3 panel b150 df1e series 2.5mm pitch connectors for full lock and discrete wire connection right angle pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3 : styles of 2 to 4 contact connectors partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 df1e- 0 2p-2.5ds(**) df1e- 0 3p-2.5ds(**) df1e- 0 4p-2.5ds(**) df1e- 0 5p-2.5ds(**) df1e- 0 6p-2.5ds(**) df1e- 0 7p-2.5ds(**) df1e- 0 8p-2.5ds(**) df1e- 0 9p-2.5ds(**) df1e-10p-2.5ds(**) df1e-11p-2.5ds(**) df1e-12p-2.5ds(**) df1e-13p-2.5ds(**) df1e-14p-2.5ds(**) df1e-15p-2.5ds(**) contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated hrs no. 541-0985-0 ** 541-0986-3 ** 541-0987-6 ** 541-0988-9 ** 541-0989-1 ** 541-0990-0 ** 541-0991-3 ** 541-0992-6 ** 541-0993-9 ** 541-0994-1 ** 541-0995-4 ** 541-0996-7 ** 541-0997-0 ** 541-0998-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b151 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3 : styles of 2 to 4 contacts partially differ from those in above figures. part no. p = 2.50.05 a0.1 * C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 5.9 5.4 a b 3.6 10.8 3.2 10 a p=2.5 m 0.64 contact no. mark mold cavity no. mark note 2 contact no.1 indicated df1ec- 0 2p-2.5dsa(**) df1ec- 0 3p-2.5dsa(**) df1ec- 0 4p-2.5dsa(**) df1ec- 0 5p-2.5dsa(**) df1ec- 0 6p-2.5dsa(**) df1ec- 0 7p-2.5dsa(**) df1ec- 0 8p-2.5dsa(**) df1ec- 0 9p-2.5dsa(**) df1ec-10p-2.5dsa(**) df1ec-11p-2.5dsa(**) df1ec-12p-2.5dsa(**) df1ec-13p-2.5dsa(**) df1ec-14p-2.5dsa(**) df1ec-15p-2.5dsa(**) hrs no. 541-0867-4 ** 541-0868-7 ** 541-0869-0 ** 541-0870-9 ** 541-0871-1 ** 541-0872-4 ** 541-0873-7 ** 541-0874-0 ** 541-0875-2 ** 541-0876-5 ** 541-0877-8 ** 541-0878-0 ** 541-0879-3 ** 541-0880-2 ** no. of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [specific no.] * * , ( * * ) (36) : gold plated (35) : tin plated a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 b 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 rohs yes b152 df1e series 2.5mm pitch connectors for full lock and discrete wire connection straight pin header for potting ? pcb mounting pattern (board thickness t = 1.6 0.1) note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, th e quantity for delivery will be changed according to spec number. note 2 : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3 : styles of 2 to 4 contact may partially differ from the above figures. part no. no. of contacts p = 2.50.05 a0.1 * C ?1.1 +0.1 0 contact no. mark mold cavity no. mark note 2 note 2 contact no.1 indicated 6.95 c 4.5 8.3 5.9 5.4 a b 3 16.3 3.2 10 a m 0.64 p=2.5 df1eg- 0 2p-2.5dsa(**) df1eg- 0 3p-2.5dsa(**) df1eg- 0 4p-2.5dsa(**) df1eg- 0 5p-2.5dsa(**) df1eg- 0 6p-2.5dsa(**) df1eg- 0 7p-2.5dsa(**) df1eg- 0 8p-2.5dsa(**) df1eg- 0 9p-2.5dsa(**) df1eg-10p-2.5dsa(**) df1eg-11p-2.5dsa(**) hrs no. 541-0923-3 ** 541-0924-6 ** 541-0925-9 ** 541-0926-1 ** 541-0927-4 ** 541-0928-7 ** 541-0929-0 ** 541-0930-9 ** 541-0931-1 ** 541-0932-4 ** 2 3 4 5 6 7 8 9 10 11 rohs yes a 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 b c 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 8.0 8.0 8.0 7.8 7.8 7.8 7.8 7.8 7.8 7.8 [specific no.] * * , ( * * ) (35) : tin plated b153 df1e series 2.5mm pitch connectors for full lock and discrete wire connection 4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + x ) 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 in-line plug (panel mount lock type) ? panel cutout note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4 : use the no radius side at the panel edge in the looking area. note 5 : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6 : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b156 for the retainer. part no. no. of contacts a b c d e rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated 3 5 7 9 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 a 10 note 2 note 3 df1e- 0 2ep-2.5c df1e- 0 3ep-2.5c df1e- 0 4ep-2.5c df1e- 0 5ep-2.5c df1e- 0 6ep-2.5c df1e- 0 7ep-2.5c df1e- 0 8ep-2.5c df1e- 0 9ep-2.5c df1e-10ep-2.5c 541-0943 -0 541-0944 -3 541-0945 -6 541-0946 -9 541-0947 -1 541-0948 -4 541-0949 -7 541-0950 -6 541-0951 -9 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 photo: contact inserted. 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8 panel thickness 1.5 1.0 0.5 0.0 x 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 yes b154 df1e series 2.5mm pitch connectors for full lock and discrete wire connection in-line plug note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to the specific no. note 2 : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3 : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4 : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b156 for retainer. part no. no. of contacts a b rohs hrs no. contact no. mark contact no. mark contact no. mark mold cavity no. mark contact no.1 indicated note 2 note 3 3 5 7 9 10 1 p = 2.5 b a 8.1 6.9 18.8 0.9 a 10 df1ea- 0 2ep-2.5c df1ea- 0 3ep-2.5c df1ea- 0 4ep-2.5c df1ea- 0 5ep-2.5c df1ea- 0 6ep-2.5c df1ea- 0 7ep-2.5c df1ea- 0 8ep-2.5c df1ea- 0 9ep-2.5c df1ea-10ep-2.5c 541-0957-5 541-0958-8 541-0959-0 541-0960-0 541-0961-2 541-0962-5 541-0963-8 541-0964-0 541-0965-3 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes photo: contact inserted b155 df1e series 2.5mm pitch connectors for full lock and discrete wire connection socket note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3 : the 2 consult has no wall on the locking side note 4 : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b156 for the retainer. part no. no. of contacts a b c rohs hrs no. 7.55 contact no.1 indicated contact no. mark note 4 p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 mold cavity no. mark df1e- 0 2s-2.5c df1e- 0 3s-2.5c df1e- 0 4s-2.5c df1e- 0 5s-2.5c df1e- 0 6s-2.5c df1e- 0 7s-2.5c df1e- 0 8s-2.5c df1e- 0 9s-2.5c df1e-10s-2.5c df1e-11s-2.5c df1e-12s-2.5c df1e-13s-2.5c df1e-14s-2.5c df1e-15s-2.5c 541-0811-0 541-0812-2 541-0813-5 541-0814-8 541-0815-0 541-0816-3 541-0817-6 541-0818-9 541-0819-1 541-0820-0 541-0821-3 541-0822-6 541-0823-9 541-0824-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 yes photo: contact inserted b156 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b retainer note 1 : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, t he quantity for delivery will be changed according to spec number. note 2 : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and in-line plug. part no. no. of contacts a b rohs hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e- 0 2rs/p-2.5 df1e- 0 3rs/p-2.5 df1e- 0 4rs/p-2.5 df1e- 0 5rs/p-2.5 df1e- 0 6rs/p-2.5 df1e- 0 7rs/p-2.5 df1e- 0 8rs/p-2.5 df1e- 0 9rs/p-2.5 df1e-10rs/p-2.5 541-0971-6 541-0972-9 541-0973-1 541-0974-4 541-0975-7 541-0976-0 541-0977-2 541-0978-5 541-0979-8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 yes b157 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b plug crimping contact 13.9 2 0.68 2.4 1.2 18.9 0.64 part no. df1e-2022pcf df1e-2022pc df1e-2428pcf df1e-2428pc df1e-2022pcfa df1e-2022pca df1e-2428pcfa df1e-2428pca 541-0937-8 541-0938-0 541-0939-3 541-0940-2 541-1003-0 541-1004-3 541-1005-6 541-1006-9 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack tin plated gold plated yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. packaging finish rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 3.0 to 3.7mm packaging finish b158 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b socket crimping contact df1e-2022scf (a) df1b - * * * * scf (a) 1.6 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 2.4 1.95 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated tin plated gold plated part no. df1e-2022scf df1e-2022sc df1b-2022scf df1b-2022sc df1b-2428scf df1b-2428sc df1b-30scf df1b-30sc df1e-2022scfa df1e-2022sca df1b-2022scfa df1b-2022sca df1b-2428scfa df1b-2428sca df1b-30scfa df1b-30sca 541-0999-5 541-1000-2 541-0223-1 541-0224-4 541-0678-1 541-0679-4 541-0682-9 541-0683-1 541-1001-5 541-1002-8 541-0662-1 541-0663-4 541-0680-3 541-0681-6 541-0684-4 541-0685-7 ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ? 1.1mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?1.2 up 1.9mm ?1.8mm ?1.6mm ?0.9 up 1.5mm ?1.5mm ?1.3mm ?1.2mm ?0.6 up 1.2mm ?1.1mm 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 1007 1061 1007 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 20 awg 22 awg 24 awg 26 awg 28 awg 24 awg 26 awg 28 awg 30 awg 30 awg 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 21/0.18 17/0.16 11/0.16 7/0.16 7/0.127 11/0.16 7/0.16 7/0.127 7/0.1 7/0.1 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack 10,000 / reel 100 / pack yes applicable cable jacket diameter ul style wire size stranded wire conductor hrs no. rohs note 1 : crimping contact extraction tool df-c-po(b) note 2 : applicable wire with tin plated solid soft conductor. note 3 : when using other than the recommended wire, contact your nearest hirose representative. note 4 : strip length : 2.0 to 2.5mm b159 df1e series 2.5mm pitch connectors for full lock and discrete wire connection b crimping tools b precautions 1. recommended soldering condition flow : 260? for 10 seconds manual soldering : 300? for 3 seconds 2. cleaning condition refer to wire-to-board connector use hand book. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection condition refer to wire-to-board connector use hand book. 4. cautions to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. insert the contact securely and then mount the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance. 5. precautions refer to wire-to-board connector use hand book. hrs no. applicable contact applicator 901-4561-0 df1e-2022scf df1e-2022scfa 901-4510-9 df1b-2022scf df1b-2022scfa 901-4518-0 df1b-2428scf df1b-2428scfa 901-4517-8 df1b-30scf df1b-30scfa 901-4509-0 df1e-2022pcf df1e-2022pcfa 901-4521-5 df1e-2428pcf df1e-2428pcfa main press unit 901-0001-0 ??? manual crimping tool 550-0277-1 df1e-2022sc 550-0182-7 df1b-2022sc df1b-2022sca 550-0209-1 df1b-2428sc df1b-2428sca 550-0211-3 df1b-30sc df1b-30sca 550-0278-4 df1e-2022pc 550-0279-7 df1e-2428pc item contact extraction tool 550-0179-2 df1e-2022sc f a df1b- ???? sc f a df1e- ???? pc f a note 1 : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2 : if any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any product s. note 3 : for the crimping process, refer to "crimping quality standards" and "crimping condition". part no. ap105-df1e-2022s ap105-df1b-2022s ap105-df1b-2428s ap105-df1b-30s ap105-df1b-2022p ap105-df1b-2428p cm-105c ht102/df1e-2022s df1b-ta2022shc df1b-ta2428shc df1b-ta30shc ht102/df1be-2022p ht102/df1be-2428p df-c-po b ? ? ? ? ? ? ? ? ?

▲Up To Search▲

Price & Availability of DF1E-07EP-25C

	To Download DF1E-07EP-25C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .